How to Slow Down a YouTube Video for Guitar Practice

Updated November 6, 2026

Quick answer: tap the video, tap Settings (the gear), then Playback speed, and pick 0.5× or 0.75×. On a computer, click Settings › Speed, or press < and > on the keyboard. YouTube keeps the pitch the same, so you can play along in tune. Use the Custom slider for 0.05× steps and raise the speed a notch each time you play the part cleanly.

Why slowing the video works (and where it stops)

At full speed you can’t see which fingers go where, and you can’t hear every note in a fast run. YouTube time-stretches the audio when you change the speed, so the notes stay at the same pitch as your guitar instead of dropping the way a slowed-down tape would. Half speed done the crude way would put everything a whole octave lower; YouTube avoids that.

What YouTube doesn’t do is loop a few bars, change the key, or play anything that isn’t on YouTube. That’s fine for most lessons, as long as you know the workarounds below.

Slow down a YouTube video on iPhone (free)

  1. Open the video in the YouTube app.
  2. Tap the video once, then tap Settings (the gear icon).
  3. Tap Playback speed.
  4. Pick a preset such as 0.5× or 0.75×, or drag the slider to a custom speed between 0.25× and 2× in 0.05× steps.
  5. To jump back 10 seconds and hear the part again, double-tap the left side of the video.

Careful with the press-and-hold gesture: holding your finger on the video plays it at 2×, the opposite of what you want.

Slow down a YouTube video on a computer (free)

A laptop on a music stand is often easier than a phone, because the keyboard shortcuts let you control the video without letting go of the guitar for long.

  1. Hover over the player and click Settings › Speed, then a preset or Custom for the slider.
  2. Or use the keyboard: < (Shift + comma) slows down, > (Shift + period) speeds up.
  3. J goes back 10 seconds, K pauses, L goes forward 10 seconds.
  4. Pause, then press , or . to step one frame back or forward. This is the best trick for guitar: freeze the video on a chord shape or a bend and see exactly which fret and finger the player uses.
  5. Right-click the video and choose Loop to repeat the whole video. Use it for a short lesson clip; for a longer one you’ll still jump back with J.

What speed should you practise at?

Start where you can play it cleanly, not where it sounds impressive. For a riff at 120 BPM:

YouTube speed Tempo you’re playing Use it for
0.5× 60 BPM Seeing the fingering, finding each note
0.6× 72 BPM First clean play-throughs
0.75× 90 BPM Getting it smooth, three times in a row
0.9× 108 BPM Building up to tempo
1× 120 BPM The real thing

From 0.5× to 1× in 0.05× steps is 10 small jumps. Move up one when you’ve played it three times in a row without a mistake. Don’t know the song’s tempo? Tap along on our tap tempo counter, or see how to find the BPM of a song.

Tune to the video first

Plenty of guitarists on YouTube tune a half step down or use drop D, and some recordings sit a little off standard pitch. If you’re playing the right frets and it still sounds sour, that’s why. Check your strings with the free online tuner, then match the player’s tuning; the video description often says which tuning they use.

When YouTube isn’t enough

The pain starts when the hard part is a four-second lick in a ten-minute video: you end up dragging the progress bar back to the same spot over and over. YouTube can’t repeat just that section, and it can’t move the key if the lesson is in a tuning you don’t want to retune for.

Apps can’t open YouTube videos, but for a song file you own, a lesson you filmed yourself, or a video saved in Photos, a practice app does it properly. In Pitchius you set the tempo from 25% to 200% in 5% steps without changing the key, tap Part starts here and Part ends here to repeat a phrase with no gap, and shift the key ±12 semitones to match your tuning.

Pitchius also has a free Listen mode: play the YouTube video out loud next to your iPhone and it suggests the song’s key, BPM and a capo fret from the microphone. It can’t change the speed or key of the video itself. For the full slow-down-and-loop method, see how to learn a guitar solo by ear.

Which should you use?

Your situation Do this
Following a YouTube lesson on your phone Settings › Playback speed, 0.5× to 0.75×
Need to see exact finger positions On a computer: pause, then , and . to step frames
Short lesson clip to play along to YouTube’s Loop on a computer
One hard phrase in a long song you own A practice app with an A–B loop
Lesson is in a tuning you don’t use Retune with a tuner, or shift the key of your own copy

For slowing down song files rather than videos, our guide on how to slow down a song without changing the pitch covers the rest.

Frequently asked questions

Does slowing down a YouTube video change the pitch?

No. YouTube keeps the pitch the same at every playback speed, so a riff at 0.5× is still in the right key for your guitar. It just sounds a bit smeared at very low speeds.

Can I loop just one part of a YouTube video?

Not with YouTube's own controls. Loop video repeats the whole video, so for a short section you jump back by hand: the J key or ← arrow on a computer, or a double-tap on the left side of the video on a phone.

Can I open a YouTube video in a slow-down app?

Not directly: apps can't pull audio out of the YouTube app, and downloading videos outside YouTube's own features breaks its terms. Use YouTube's speed setting for the video, and a practice app for song files you own or lessons you filmed yourself.