Free online guitar tuner
Uses your microphone in this browser only. Nothing is recorded or sent anywhere.
How to use it
- Pick your instrument and tuning. Guitar · Standard is E A D G B E from the thickest string.
- Tap Start tuner and allow microphone access. On a phone, hold it near the soundhole or the amp.
- Pluck one string and let it ring. The tuner finds the nearest string for you.
- If the needle is left of centre, the string is flat: tighten it. Right of centre is sharp: loosen it. Stop when it turns green (within 5 cents).
Standard tuning frequencies
With the usual reference of A4 = 440 Hz, each open string should read:
| String | Frequency |
|---|---|
| 6 (low E2) | 82.41 Hz |
| 5 (A2) | 110.00 Hz |
| 4 (D3) | 146.83 Hz |
| 3 (G3) | 196.00 Hz |
| 2 (B3) | 246.94 Hz |
| 1 (high E4) | 329.63 Hz |
Each semitone is about 6% higher in frequency than the one below, so a string that reads 100 cents flat is a whole fret too low. More on alternate tunings in how to tune a half step down.
Tips for a steady reading
- Tune up to the note. If you overshoot, drop below and come back up; strings hold better that way.
- Play with your normal touch. Digging in hard makes a string go briefly sharp.
- New strings stretch. Expect to retune a few times in the first day.
- Playing along with a recording? Some songs are tuned a little off standard. Match the recording's reference, or change the recording's key instead with an app like Pitchius.
Frequently asked questions
Does this tuner record me?
No. Your browser listens through the microphone only while the tuner is on, works out the pitch on your device, and throws the sound away. Nothing is saved or sent.
Why does it jump between notes?
Play one string at a time and let it ring. Chords, background noise and very soft notes make any tuner jumpy. Mute the other strings with your hand if they ring along.
What is A4 = 440 Hz?
It's the standard reference pitch most music is tuned to. If you're playing along with a recording that sounds slightly off, it may use a different reference like 442 Hz; change the reference to match.
How do I tune a half step down?
Choose "Half step down" and tune each string to E♭ A♭ D♭ G♭ B♭ E♭, from the thickest string. Our guide to half step down tuning has the details.
More free tools: the vocal range test, the song key & BPM finder and the capo calculator.