Quick answer: play the song and tap along to the beat on a free tap tempo counter; after about eight taps you’ll have the BPM. No device handy? Count the beats for 15 seconds and multiply by 4. If you’d rather not tap at all, a BPM detector can suggest the tempo from the audio, but check it’s not half or double the real speed.
What BPM actually counts
BPM is beats per minute: how many times you’d tap your foot in a minute. At 60 BPM there’s one beat every second; at 120 BPM, two. The beat is the steady pulse you nod your head to, usually the kick and snare, not every hi-hat or every word of the lyric.
| BPM | Beats per second | Time between beats | Beats in 15 s |
|---|---|---|---|
| 60 | 1.00 | 1,000 ms | 15 |
| 80 | 1.33 | 750 ms | 20 |
| 100 | 1.67 | 600 ms | 25 |
| 120 | 2.00 | 500 ms | 30 |
| 140 | 2.33 | 429 ms | 35 |
Method 1: tap along (free, fastest)
- Open the tap tempo tool in your browser. It works with a tap on a phone, a mouse click or the space bar.
- Play the song and skip past the intro to a verse or chorus where the drums are steady.
- Tap on every beat, ideally with the kick and snare. Keep going for at least eight taps; the tool averages them, so the number settles the longer you tap.
- Read the BPM. The tool also shows half time and double time, which helps with the next section.
Tapping is the best free method because it works on anything you can hear: a song on the radio, a YouTube video, a band in the room.
Method 2: count with a stopwatch (free, no internet)
- Start a stopwatch (iPhone: Clock › Stopwatch) on a beat and count “one” on the next beat.
- Count every beat for exactly 15 seconds.
- Multiply by 4. Thirty-one beats in 15 seconds is 124 BPM.
Because you can be off by a beat at either end, a 15-second count is only accurate to about ±4 BPM. Counting for 30 seconds and doubling halves that error to about ±2 BPM, and a full 60-second count needs no maths at all.
| Count for | Multiply by | Each miscounted beat changes the result by |
|---|---|---|
| 15 seconds | 4 | 4 BPM |
| 30 seconds | 2 | 2 BPM |
| 60 seconds | 1 | 1 BPM |
Method 3: let a detector suggest it
If you have the song as a file, or can play it out loud, our free key & BPM finder analyses an MP3, M4A or WAV in your browser, or listens through your microphone (that’s the way to do it for a song streaming on Spotify or Apple Music). Nothing is uploaded, and it shows the key too. Many DAWs and DJ apps also show a track’s BPM after analysing it.
Detectors work best on music with a steady, programmed beat. They find the strongest pulse, which isn’t always the one you’d tap, so treat the number as a suggestion and check it by tapping along for a few seconds.
Half time, double time and other traps
The most common “wrong” BPM is exactly half or double the right one. A hip-hop or trap track might have fast hi-hats over a slow kick and snare, so it can read as 70 or 140. Both are the same song. Choose the one that matches how you’d count it in a band or how a dancer would step to it, and stay consistent.
Other things that throw the number off:
- Intros and outros. They’re often looser or slower. Measure from the middle of the song.
- Live and older recordings. Without a click track the tempo drifts, so you’ll get an average, not one exact figure.
- Tempo changes. Some songs speed up, slow down for a bridge, or switch to half time. Name the BPM of the section you care about.
- Odd time signatures. BPM counts beats, not bars. A song in 3/4 or 6/8 still has a BPM; just tap the pulse you feel.
Once you know the BPM: practise at your own tempo
Usually you want the BPM so you can play along, and the real song is too fast. The free route is YouTube’s speed setting (0.25× to 2×), but it works in percent, so you have to do the maths: to play a 120 BPM song at 90 BPM you need 75%. Here’s how to slow down a YouTube video for guitar step by step.
On iPhone, Pitchius suggests the BPM automatically when you add a song from Files, your music library or a video. If it’s read at half or double time, tap Double or Halve, or use its Tap tempo to set it yourself. Then switch the tempo display to BPM and type the tempo you want, or step it by 1 BPM; the key stays where it is, and you can turn on a click on every beat at the new tempo (it plays along but isn’t exported). For a song you can’t open, such as one streaming on Spotify, the free Listen mode suggests the BPM and key from the microphone, but it can’t change streaming audio. For practice speeds and looping, see how to slow down a song without changing pitch.
Which method should you use?
| Your situation | Best way |
|---|---|
| You can hear the song and have a browser | Tap along on the tap tempo tool |
| No internet, just a phone clock | Count for 30 s and double it |
| You have the file, or it’s streaming | A BPM detector, then tap to check |
| The number feels too slow or too fast | Halve or double it |
| You need the key as well | The key & BPM finder, then confirm the key by ear |