Guitar Out of Tune With a Recording? How to Match It

Updated November 8, 2026

Quick answer: your guitar is fine; the recording isn’t at A4 = 440 Hz. Hold a chromatic tuner up to a long note in the song to see how many cents off it is, then either set your tuner’s reference to match (for example 442 Hz for +8 cents) and retune, or keep your guitar at 440 and shift the recording to meet you.

Why recordings drift off standard tuning

A recording can be perfectly in tune with itself and still clash with a guitar tuned to 440 Hz. The usual reasons:

  • Speed changes. Tape that ran slightly fast or slow, or a song sped up in mastering, moves the pitch with it. Just 1% faster raises everything about 17 cents.
  • A different reference. Bands tuned to a studio piano, to each other, or to 442, 444 or 432 Hz. (Here’s what 432 Hz vs 440 Hz actually changes.)
  • Video and upload processing. Old film and some video conversions shift pitch slightly, which is why a song on YouTube can sound off while the CD version doesn’t.
  • Deliberate detuning. Half step down (E♭) and lower tunings are common in rock and metal. That’s a whole fret, not a few cents, so it needs a different fix: see how to tune a guitar half step down.

Step 1: Measure how far off the recording is

  1. Open our free online tuner and choose Chromatic.
  2. Play the song on a speaker and hold the mic near it during a single sustained note: a held bass note, the last note of the song, or a long sung note. Busy, full-band moments confuse any tuner.
  3. Read the cents. Take two or three notes and average them.
Tuner reads What it means Fix
Within ±5 cents The recording is standard; check your own tuning and intonation Retune your guitar
5 to 50 cents off Slightly off A440 Step 2 or Step 3 below
About 100 cents flat Half step down (E♭) Tune down a semitone, or raise the song one semitone
About 200 cents flat Whole step down (D) Tune down a whole step, or raise the song two semitones

Step 2 (free): Retune your guitar to the recording

Set the tuner’s Reference A4 to the recording’s pitch, then tune every string as normal. The reference is 440 × 2^(cents ÷ 1200), so you don’t need to guess:

Recording is Set reference A4 to
40 cents flat 430 Hz
30 cents flat 432 Hz
20 cents flat 435 Hz
10 cents flat 437.5 Hz
10 cents sharp 442.5 Hz
20 cents sharp 445 Hz
30 cents sharp 448 Hz
40 cents sharp 450 Hz

The browser tuner accepts 415 to 466 Hz; the Pitchius app’s free tuner accepts 430 to 450 Hz. No tuner handy? Tune by ear: pause on a clear low note, match your low E (or whichever string fits) to it, then tune the rest from that string with the usual 5th-fret method (step by step in how to tune a guitar by ear).

The catch: you’re now out of tune with every other song, your band and any keyboard. For one practice session that’s fine. For a set list it means retuning between songs, which is where the next option helps.

Step 3: Keep your guitar at 440 and shift the recording

Instead of moving six strings, move the song. A pitch shifter that changes key without changing speed can nudge the recording by the exact number of cents you measured, so it lines up with your standard-tuned guitar.

In Pitchius:

  1. Add the song from Files, a voice memo, a video in Photos, or a purchased song stored on your iPhone. Streaming Apple Music and Spotify songs are copy-protected, so no app can open them; use a file you own.
  2. If the recording was about 100 cents flat, raise the key +1 semitone (or +2 for whole step down). Your first 3 songs get every free feature, including key and tempo.
  3. For a smaller offset, use Fine tune (Pro, ±50 cents) in the opposite direction to what you measured: if the song was 20 cents sharp, set −20 cents.
  4. Check with the tuner again, or just play along. Pitchius remembers the setting for that song.

You can also slow a fast passage down without changing the corrected pitch; see how to slow down a song without changing the pitch.

Which should you use?

Situation Best fix
One song, practising alone Retune your guitar to the recording (free)
Learning several songs in a row Shift each recording to 440 so you never retune
Recording is a half step or whole step down Tune down, or raise the song 1–2 semitones
Playing with a band or keyboard Keep the guitar at 440 and shift the recording
Readings jump around Measure a quieter, single held note; full mixes mislead tuners

If the recording measures within 5 cents and still sounds wrong, the problem is likely your guitar’s intonation (fretted notes going sharp higher up the neck) rather than the song. Tune the open strings, then compare the 12th fret on the tuner: if it reads sharp or flat, the guitar needs an intonation setup.

Frequently asked questions

Why does a song sound out of tune when my guitar is perfectly in tune?

The recording probably isn't at A4 = 440 Hz. Older records were often sped up or slowed down slightly, some bands tuned to a piano or to their own ear, and some videos shift pitch in conversion. Your guitar is right; the recording just uses a different reference.

How do I know if a song is in half step down or just slightly off?

Measure a held note in the recording with a chromatic tuner. Around 100 cents flat (a whole fret lower) means half step down tuning. Anything within about 50 cents of a normal note means the recording is just slightly off standard.

What does 432 Hz mean on a tuner?

It sets the A above middle C to 432 Hz instead of 440 Hz, which puts every string about 32 cents (a third of a semitone) lower. Use it only if the recording you're playing along with actually sits there.