Quick answer: DADGAD tuning is D A D G A D, from the thickest string to the thinnest. From standard tuning, lower the 6th string (E→D), the 2nd string (B→A) and the 1st string (E→D) a whole step each; the 5th, 4th and 3rd strings don’t move. Use a chromatic tuner, or tune by ear against the open D and A strings.
Why DADGAD
The open strings hold just three notes, D, A and G, so strumming them gives a Dsus4 chord: neither major nor minor. That open, ringing sound is why DADGAD is a fixture in Celtic and fingerstyle acoustic music, where the open strings drone under a melody. MusicRadar credits Davey Graham, Bert Jansch and John Renbourn with popularising it in the 1960s, and names Led Zeppelin’s “Kashmir” and “Black Mountain Side”, Pink Floyd’s “Poles Apart”, Ed Sheeran’s “Photograph” and Ben Howard’s “In Dreams” among songs played in it. Guitar Player notes that Pierre Bensusan adopted it as his standard tuning in 1978.
Half of it is already familiar: the 5th, 4th and 3rd strings (A, D, G) are exactly where they are in standard tuning.
The notes and frequencies
With the standard reference of A4 = 440 Hz:
| String | Standard | DADGAD | Change | Frequency |
|---|---|---|---|---|
| 6 (thickest) | E2 | D2 | down 2 semitones | 73.42 Hz |
| 5 | A2 | A2 | none | 110.00 Hz |
| 4 | D3 | D3 | none | 146.83 Hz |
| 3 | G3 | G3 | none | 196.00 Hz |
| 2 | B3 | A3 | down 2 semitones | 220.00 Hz |
| 1 (thinnest) | E4 | D4 | down 2 semitones | 293.66 Hz |
There are three D strings (D2, D3, D4) and two A strings (A2, A3), each an octave apart. The by-ear checks below use them.
Tune to DADGAD with a tuner
- Start from standard tuning so the 5th, 4th and 3rd strings are right (see guitar standard tuning notes if you need them).
- Open a chromatic tuner. Our free online tuner works in your browser: choose Chromatic and it names whatever note you play.
- Lower the 6th string to D. It passes E♭ on the way.
- Lower the 2nd string to A. It passes B♭ on the way.
- Lower the 1st string to D. Check the tuner reads D4 (293.66 Hz), not an octave off.
- For each string, go slightly below the note, then tune up to it so it holds. Then check all six again: slackening three strings changes the pull on the neck, and the others can drift a little.
Tune to DADGAD by ear
Your 5th (A), 4th (D) and 3rd (G) strings don’t change, so use them as the reference.
- 6th string to D. Lower it until its 12th-fret harmonic (touch the string lightly over the 12th fret and pluck) matches the open 4th string. Both are D3, so you’re matching a unison, which is easier to hear than an octave. Check: the 6th string at the 7th fret is A2, the same as the open 5th string.
- 2nd string to A. Lower it until it matches the 3rd string at the 2nd fret (A3). The 5th string’s 12th-fret harmonic is also A3, so it should match that too.
- 1st string to D. Lower it until it matches the 2nd string at the 5th fret (D4). The 4th string’s 12th-fret harmonic and the 3rd string at the 7th fret are D4 as well.
- Strum. All six open strings should ring as one even Dsus4 chord. A string that makes it sound sour or wobbly is the one to adjust.
Step 3 depends on step 2, so tune the 2nd string before the 1st. If the 1st string sounds right against the 2nd but wrong against the 4th string’s harmonic, the 2nd string is off; fix it and come back.
First chords in DADGAD
These cover the I, IV and V chords in D, enough for many folk tunes. Shapes are written 6th string to 1st (x = don’t play).
| Chord | Shape | Notes |
|---|---|---|
| Dsus4 | 0 0 0 0 0 0 | D A D G A D |
| D5 | 0 0 0 2 0 0 | D A D A A D |
| D major | 0 0 0 2 0 4 | D A D A A F♯ |
| Gsus2 | 5 5 0 0 0 0 | G D D G A D |
| A7sus4 | x 0 2 0 0 0 | A E G A D |
- The drone trick: most DADGAD shapes fret one or two strings and let the rest ring open. Moving the 6th and 5th strings to the 5th fret turns the open drone into Gsus2; that’s the whole IV chord.
- Sus chords resolve: many DADGAD tunes sit on Dsus4 and settle into D5 or D major by fretting the 3rd string at the 2nd fret.
- Capo: a capo moves everything up a semitone per fret. Capo 2 puts you in E, capo 5 in G and capo 7 in A, with the same shapes. Our capo calculator does the maths for standard-tuning shapes if you’re switching between the two.
- Back to standard: raise the 6th string to E (82.41 Hz), the 2nd to B (246.94 Hz) and the 1st to E (329.63 Hz).
Learning DADGAD songs from the recording
The tuning takes a minute. The hard part comes next: fingerstyle DADGAD parts mix fretted notes with ringing open strings, and at full speed it’s hard to hear which is which. YouTube’s speed setting slows a video down for free (see how to slow down a YouTube video to learn guitar), but you still have to drag back to the same bar every time, and fast passages need more than one listen.
If a recording sounds a little off from your open strings, the player may have tuned to their own reference or used a capo. Why your guitar is out of tune with the recording shows how to check. Pitchius opens your own audio files and purchased songs, not Apple Music or Spotify streams, which no app can open. For a practice routine once the passage is looped, see how to learn a song that’s too fast. If you only want the lower bass string, drop D tuning is a smaller change, and open G tuning is the major-chord alternative for slide.
Which method should you use?
| Your situation | Do this |
|---|---|
| You have a tuner (or a browser) | Chromatic mode, three strings down to D, A, D |
| No tuner, middle strings in tune | 6th-string harmonic to the open 4th, then 2nd to 3rd-string 2nd fret, 1st to 2nd-string 5th fret |
| Already in drop D | Lower only the 2nd and 1st strings a whole step |
| Already in open D | Raise the 3rd string a semitone, F♯ to G |
| Song sounds higher than your DADGAD | Try a capo: 2 for E, 5 for G, 7 for A |
| Switching back for the next song | Raise the same three strings to E, B, E |